Looking to increase the quality of your products?
Ensuring you apply your heat transfers accurately is the most vital element to manufacturing your products. Whether you’re fusing onto a JT001 Tri-Blend T-Shirt or a JH030 AWDIs Sweat, with the transfer technology available today, you can create high-quality designs that work with your garments.
If transfers are not fused accurately, the longevity of the finished product will be affected and chances of future and repeat business will be compromised.
Today we’re going to explain the most important elements for application, so you can be 100% confident when you hand your products over to customers that the transfer will last just as long as your AWDis garments.
Time, Temperature and Pressure!
The magic three of heat printing. Time, Temperature and Pressure are the essential elements of applying onto any type of garment decoration with a heat press.
Transfers are designed to apply at a specific temperature for between 10-12 seconds to save you time in your production process. Combine this with accurate pressure distributed evenly throughout the platen, to guarantee the most complete garment on the market.
Fusing at a higher temperature for less time will not achieve the same result as the original settings. Follow the recipe, don’t cheat.
Pre-pressing is a vital part of the application process. Giving your garment a 5 second hit with the heat press before any transfers are applied, removes any moisture and creases from the garment. Ensuring the transfer is being applied to a completely flat and prepped surface.
Transfers are designed to apply at a specific temperature for either 10 or 12 seconds to save you time in your production process. Fusing at a higher temperature for less time will not achieve the same result as the original settings.
Pro-Tip Hotronix Heat Presses come with dual timers, allowing you to set the 5 second prepress and the 10-12 second application time alongside each other, so you don’t have to keep adjusting the timers between every pre-press and application. Saving you time yet again, and therefore money.
*Dual timers available on all Hotronix models except the MAXX Clam.
Heat Transfers are designed to apply at a temperature. Fusing at a higher temperature for less time will not have the same effect to the transfer as the accurate settings will.
Think of it like cooking a chicken, you wouldn’t increase the oven temperature and cook it for less time, it’s the same principle with heat transfers.
Regardless of whether you’re fusing a full front print onto a t-shirt or a more specific location such as an arm print or near a seam/pocket, applying your transfer to a completely flat surface is essential. Removing any seams, zips or pockets from the platen and raising the print area will allow the entire transfer to receive even pressure when the top platen is lowered and no areas to be left untouched.
- Over Centre Pressure
Having over the centre adjustment allows the pressure to be distributed evenly throughout the platen. Giving you the most consistent press available. All Hotronix Presses have patented over centre pressure adjustment.
If your heat press isn’t already threadable, consider a Caddie Stand or a Counter Caddie Stand to add Threadability to your heat press. This will save time, helps to obtain a flat and even pressing surface and minimises the chance of press marks on the inside of the garment.
- Interchangeable Heat Press Platens
Interchangeable platens are a great option if you’re trying to apply a transfer to a more difficult to reach area of the garment or an area that is close to a seam or pocket. For example the JH021 Cross Neck Hoodie, if you were to fuse around the chest area or near the pocket you would need to ensure those raised areas were eliminated from the fuse surface area.
Replace the main paten with a smaller one that suits the application. All Hotronix Heat Presses allow you to interchange over 15 different shaped and sized platens.
Follow all these expert tips using Target Transfer printers for a perfect and long-lasting result. If you want to get your hands on an AWDis Brands garment, get in touch with your distributor.